Atlantic Society of Radio Controlled Modellers

Atlantic Society of Radio Controlled Modellers
https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl Atlantic Society of Radio Control Modellers >> General Discussions >> Failure of Servo on the 600 https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl?num=1370259598 Message started by Raptor on Jun 3^rd, 2013 at 8:39am

Title: Failure of Servo on the 600
Post by Raptor on Jun 3^rd, 2013 at 8:39am

puzzled I have checked the voltage coming out the battery several times , and i have check the voltage on the receiver as well, I do not see any cause as to the failure of two servers on he throttle of my 600 . I checked to make sure the carb is binding up ect... , I have plugged other servo's into the channel last night to make sure it was working , seems to work fine , plug the new servo in that i purchased on Saturday , it not working , worked for what 6 min's on Sunday .

Title: Re: Failure of Servo on the 600
Post by Newfie Bullet on Jun 3^rd, 2013 at 12:17pm

Hey Paul
are you running that servo through a gov. If you are check that that is not the issue

Title: Re: Failure of Servo on the 600
Post by Raptor on Jun 3^rd, 2013 at 12:35pm

Nope no gov. and no other leads in between servo is direct connected to futaba receiver 617