Atlantic Society of Radio Controlled Modellers | |
https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl
Atlantic Society of Radio Control Modellers >> General Discussions >> setting Fail safe https://www.asrcm.ns.ca/cgi-bin/yabb2/YaBB.pl?num=1485708945 Message started by speedbird on Jan 29th, 2017 at 12:55pm |
Title: setting Fail safe Post by speedbird on Jan 29th, 2017 at 12:55pm
my brain has failed
HOW DO I SET FAILSAFE? futaba transmitter 9c or 8fg esc plush 60 or red brick 70 channel 3 red pin removed for separate life power to Rx and servos Help :P |
Title: Re: setting Fail safe Post by stryker on Jan 29th, 2017 at 6:54pm
For the 9c it depends on what module you are running. for the Fasst module you can only failsafe the throttle and it is set when you bind the receiver.
For 8FG with a Fasst receiver same as above. For a FHSS receiver you set them in the menu on the radio. |
Title: Re: setting Fail safe Post by speedbird on Jan 30th, 2017 at 2:31am
I remember disabling the transmitter fail safe and using the receiver/ESC somehow
Anybody? |
Atlantic Society of Radio Controlled Modellers » Powered by YaBB 2.5.2! YaBB Forum Software © 2000-2024. All Rights Reserved. |